wall industries, inc. rev a PSGKF-200 series 200 watt ac/dc switching power supplies 12/11/2013 wall industries, inc. ? 37 industrial drive, exeter , nh 03833 ? tel: 6037782300 ? toll free: 88859 79255 ? fax 6037789797 website: www.wallindustries.com ? email: sales@wal lindustries.com page 1 of 4 features rohs compliant 200 watts output power 3000vac i/o isolation high efficiency up to 87.5% operating altitude up to 5000m 100% full load burnin test builtin cooling fan speed control builtin active pfc, pf > 0.95 adjustable output voltage conformal coating on both sides of pcb 25c to +70c wide operating temperature range all using 105c long life electrolytic capacitors withstand 300vac surge input for 5 sec. universal input voltage range: 85264vac (120370vd c) over load, over power, and short circuit protection 5v, 12v, 24v, and 48vdc single output models ul609501 (2nd edition), iec609501:2005 (2nd editi on), en609501:2006 safety approvals description size: weight: 7.83 x 3.90 x 1.97 inches 2.1 lbs (950g) 199.0 x 99.0 x 50.0 mm the psgkf200 series of ac/dc switching power supp lies provides 200 watts of output power in a 7.83 x 3.90 x 1.97 enclosed case with builtin c ooling fan speed control. this series consists of 5v, 12v, 24v, and 48vdc single output models with a n input voltage range of 85~264vac (120~370vdc). some features include high efficiency up to 87.5%, builtin active pfc, and 25c to +70c operating temperature range. this series also has short circuit, over load, and over power protection. all models are rohs compliant and have ul609501 (2nd edition), iec609501:2005 (2nd edition), and en609501:2006 safety approvals. model selection table output current model number input voltage range output voltage min max ripple & noise (1) output power efficiency psgkf2005 5 vdc 0a 40a 150mvpp 200w 79% psgkf20012 12 vdc 0a 16.7a 150mvpp 200w 84% psgkf20024 24 vdc 0a 8.4a 200mvpp 201.6w 86% psgkf20048 85 ~ 264 vac (120 ~ 370 vdc) 48 vdc 0a 4.2a 200mvpp 201.6w 87.5% notes 1. ripple & noise is measured at 20mhz limited band width and using a 12" twisted pairwire terminated with a 0.1f & 47f capacitors in parallel. 2. the power supply is considered a component which will be installed into final equipment. the final equipment must be re confirmed that it still meets emc directives. derating curve -25 0 10 20 30 40 50 60 70 80 90 100 100 90 80 70 60 50 40 30 20 10 0 output power (%) ambient temperature (c)
wall industries, inc. rev a PSGKF-200 series 200 watt ac/dc switching power supplies 12/11/2013 wall industries, inc. ? 37 industrial drive, exeter , nh 03833 ? tel: 6037782300 ? toll free: 88859 79255 ? fax 6037789797 website: www.wallindustries.com ? email: sales@wal lindustries.com page 2 of 4 specifications: psgkf200 series all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwis e noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ max unit input specifications ac input voltage range 85 264 vac input voltage dc input voltage range 120 370 vdc input frequency 47 63 hz ac current 3.5 a at 115vac and cold start 30 inrush current at 230vac and cold start 50 a at 115vac 0.98 power factor at 230vac 0.95 output specifications output voltage see table voltage accuracy 1.0 +1.0 % voltage adjustability 5 +10 %vo line regulation low line to high line 0.5 +0.5 % load regulation 0% to 100% full load 1.0 +1.0 % output power see table output current see table ripple & noise measured at 20mhz bw and with 0.1f and 47f capaci tors in parallel see table holdup time at 230vac and full load 10 ms setup time at 230vac and full load 2 s temperature coefficient 0.03 +0.03 %/c overshoot and undershoot 5.0 % protection short circuit protection long term mode, autorecovery over power protection hiccup mode, automaticrecovery 105 150 %po over load protection hiccup mode, automaticrecover y 105 150 %io general specifications efficiency see table primary to secondary 10ma 3000 primary to pg 10ma 1500 withstand voltage secondary to pg 10ma 500 vdc isolation resistance 100 m input to output 0.25 leakage current input to pg 1.0 ma environmental specifications operating temperature see derating curve 25 +70 c storage temperature 40 +85 c operating humidity noncondensing 20 90 % rh storage humidity noncondensing 10 95 % rh cooling builtin dc fan cooling by forced air mtbf milhdbk217f; 25c and full load 200,000 hours vibration 10~150hz, 2g 10 min./1 cycle, period for 60 min. ea ch along x, y, z axes physical specifications weight 2.1 lbs (950g) dimensions (l x w x h) 7.83 x 3.90 x 1.97 inches (199.0 x 99.0 x 50.0 mm) safety & emi (see note 2) safety approvals ul609501 (2nd edition), iec609501:2005 (2nd editi on), en609501:2006 conduction & radiation en55022, en55024 class b harmonic current en6100032,3 ems immunity en6100042,3,4,5,6,8,11; en55024, en6100062 heavy i ndustry level
wall industries, inc. rev a PSGKF-200 series 200 watt ac/dc switching power supplies 12/11/2013 wall industries, inc. ? 37 industrial drive, exeter , nh 03833 ? tel: 6037782300 ? toll free: 88859 79255 ? fax 6037789797 website: www.wallindustries.com ? email: sales@wal lindustries.com page 3 of 4 block diagram +v -v fan emi filter active inrush current limiting rectifiers power switching o.l.p. o.l.p. pfc & pwm control o.v.p. detection circuit fan speed control rectifiers & filter i/p fg mechanical drawing 7.83 [199.0] 4.96 [126.0] 2.52 [64.0] 2.56 [65.0] 0.47 [12.0] rv1 s1 0.98 [25.0] 4.61 [117.0] 1.97 [50.0] 1.30 [33.0] 4 - m3 2 - m4 fan fg con1 4 - ?0.17 [?4.4] 1.95 [49.5] 98 7 6 5 4 3 2 1 0.31 [8.0] 0.37 [9.5] 5.91 [150.0] fixture a (option) 0.28 [7] 3.35 [85.0] 3.90 [99.0] 4.69 [199.0] fixture b (option) 1.48 [37.5] 7.84 [199.0] 0.33 [8.5] 1.30 [33.0] 0.98 [25.0] 0.49 [12.5] 0.98 [25.0] 5.91 [150.0] fixture a (131400003101) unit: inches [mm] smps cover assembly screw customer plate l 4mm l fixture b (131400003201)
wall industries, inc. rev a PSGKF-200 series 200 watt ac/dc switching power supplies 12/11/2013 wall industries, inc. ? 37 industrial drive, exeter , nh 03833 ? tel: 6037782300 ? toll free: 88859 79255 ? fax 6037789797 website: www.wallindustries.com ? email: sales@wal lindustries.com page 4 of 4 company information wall industries, inc. has created custom and modifi ed units for over 50 years. our inhouse research a nd development engineers will provide a solution that exceeds your performance re quirements ontime and on budget. our iso90012008 certification is just one example of our commitment to producing a high quali ty, welldocumented product for our customers. our past projects demonstrate our commitment to you , our customer. wall industries, inc. has a reputat ion for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. we will contin ue to provide ongoing support for your project above and beyond the desig n and production phases. give us a call today to d iscuss your future projects. contact wall industries for further information: phone: (603)7782300 toll free: (888)5979255 fax: (603)7789797 email: sales@wallindustries.com web: www.wallindustries.com address: 37 industrial drive exeter, nh 03833
|
